This light indicates the Electronic Stability Control system (ESC) has been turned off by the driver.
See also:
Shift Lever Override
If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever: 1. Firmly
set the parking brake.
2. ...
Cellular phone set-up
The system set-up consists of:
– a dual-purpose aerial (sound system + cellular phone), on the vehicle roof;
– a dual-purpose aerial connection wires and ten-pin connector wiring fig. 146.
– a do ...
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...