The shift lever must be in the PARK or NEUTRAL position before you can start the engine. Apply the brakes before shifting to any driving gear.
NOTE: You must press the brake pedal before shifting out of PARK.
See also:
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt.
1. Position the latch plate as close as possible to the anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch plate, ...
To memorise speed
Proceed as follows:
❒ turn the knurled ring (A) to ON and press the accelerator pedal to the required
speed;
❒ turn the knurled ring (B) to (+) for at least three seconds, then relea ...
1. Glow Plug Light — If Equipped
The Glow Plug light will flash during engine oil viscosity sensor measurement
in cold weather.
During this measurement (up to 10 seconds), the starter will be disabled. If
the measured oil visc ...