In case of electrical failure the sunroof can be operated with the hex wrench that is located in the glove box.
There is a plug located in the rear of the sunroof opening at the center of the vehicle. Removing the plug reveals a hex opening in the motor assembly of the sunroof. Insert the hex wrench and turn, moving the sunroof to the desired location.
See also:
Memory Feature
The driver seat also has a memory feature, which can operate in two ways:
Memory Function Option 1) — Full Seat Back And Track Fore/Aft Position Memory:
After using the EZ entry function, the
Afte ...
To reset the memorised speed
If the device has been disengaged for example pressing the brake or clutch pedal,
the memorised speed can be reset as follows:
❒ accelerate gradually until reaching a speed approaching the o ...
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...