This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the ignition switch is turned to the ON/RUN position and may stay on for as long as four seconds.
If the ABS light remains on or turns on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, the conventional brake system will continue to operate normally if the BRAKE warning light is not on.
If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefits of Anti-Lock brakes. If the ABS light does not turn on when the ignition switch is turned to the ON/RUN position, have the light inspected by an authorized dealer.
See also:
Automatic Transmission – If Equipped
The shift lever must be in the PARK or NEUTRAL position before you can start
the engine. Apply the brakes before shifting to any driving gear.
NOTE: You must press the brake pedal before shifting ...
Raising The Power Top
From the convertible top fully open position, press the top close button for
approximately one second for the partially open position. Press the top close button
for approximately one second a sec ...
Windscreen/rear window wipers
BLADES
Periodically clean the rubber part using special products; TUTELA PROFESSIONAL
SC 35 is recommended.
If the rubber blades are bent or worn they should be replaced. In any case they
should ...