Turning The Car Radio On

The car radio comes on when the (ON/OFF) button is pressed briefly.

When the car radio is turned on and the on volume limit is on, the volume is limited to a setting of five even if it had been set higher when previously used.

Turning The Car Radio Off

Press and hold (approximately 2 seconds) the (ON/OFF) button to turn the radio off.

Selecting The Radio Func

By pressing the TUNER button briefly and repeatedly, the following audio sources can be selected cyclically:

• AM, FM and Satellite Bands (if equipped)

Selecting The CD Function

By briefly pressing the MEDIA button, the CD audio source can be selected (only if a CD is loaded).

Volume Adjustment

To adjust the volume, press the buttons +Vol or –Vol to increase/decrease the volume.

Mute/Pause Function

Press the button briefly to activate the MUTE function. The volume will gradually decrease and the wording “TUNER Mute” will be shown on the display (in radio mode) or “CD Pause” (in CD mode).

Press the button again to deactivate the MUTE function. The volume will gradually increase until it reaches the previously set level.

When the  volume level is changed using the dedicated controls, the Mute function is deactivated and the volume is adjusted to the new level selected.

Audio Adjustment

The functions that can be selected from the audio menu change depending on the context: AM/FM/MEDIA/ SATELLITE.

Press the AUDIO button briefly to change the Audio functions. After the AUDIO button is first pressed, the display will show the Bass level value for the source activated at that time (e.g. in FM mode the display will show the wording “FM Bass +2”).

Use the buttons to scroll through the Menu functions. To change the setting of the selected function, use the buttons.

The current status of the selected function appears on the display.

The functions managed by the Audio Menu are:

• BASS (Bass adjustment)
• TREBLE (Treble adjustment)
• BALANCE (right/left Balance adjustment)
• FADER (front/rear Balance adjustment)
• LOUDNESS (Loudness function activation/deactivation)
• EQUALIZER — if equipped (activation and selection of factory equalization adjustments)
• USER EQUALIZER — if equipped (customized equalization adjustment)

Tone Adjustment

Proceed as follows:

1. Press AUDIO button.
2. Press the button to select “Bass” or “Treble” in the AUDIO menu.
3. Press the or button or to increase/decrease the bass treble adjustments.

By pressing the buttons briefly, the levels will change progressively. By pressing them down longer, the levels will change quickly.

Balance Adjustment

Proceed as follows: 1. Press AUDIO button.

2. Press the button to set “Balance” in the AUDIO menu.

3. Press the button to increase the sound from the left speakers or the button to increase the sound from the right speakers.

By pressing the buttons briefly, the levels will change progressively. By pressing them down longer, the levels will change quickly.

Select the value “0” to set the right and left audio outputs at the same level.

Fader Adjustment

Proceed as follows: 1. Press AUDIO button.

2. Press the button to set “Fader” in the AUDIO menu.

3. Press the   button to increase the sound coming from the rear speakers or the button to increase the sound coming from the front speakers.

By pressing the buttons briefly, the levels will change progressively. By pressing them down longer, the levels will change quickly.

Select the value “0” to set the right and left audio outputs at the same level.

Loudness Function — If Equipped

The Loudness function improves the volume of the sound while listening at low volumes, increasing the bass and treble.

To activate/deactivate this function, select the “Loudness” setting in the AUDIO menu. The condition of the function (on or off) is shown on the display for a few seconds by the wording “Loudness On” or “Loudness Off”.

Preset/User*/Classic/Rock/Jazz Functions — If Equipped

The built-in equalizer can be activated/deactivated.

When the equalizer function is off, the audio settings can only be changed by adjusting the “Bass” and “Treble” settings, whereas when the function is on, the acoustic curves can be adjusted. To deactivate the equalizer, select the “EQ Preset” function in the audio menu.

To activate the equalizer, use the AUDIO button or to select one of the adjustments:

• “EQ User” (adjustment of 7 equalizer bands that can be changed by the user)
• “Classic” (equalizer preset for optimal classic music sound)
• “Rock” (equalizer preset for optimal rock and pop music sound)
• “Jazz” (equalizer preset for optimal jazz music sound) When one of the equalizer adjustments is activated the wording “EQ” lights up.

*User EQ Settings Function — If Equipped

To set a personalized equalizer adjustment: 1. Press AUDIO button.

2. Use the buttons to set EQ function.

3. Use buttons to select EQ User. 4. Press MENU button to start adjusting equalizer.

5. On the display a 7 bar graph will appears, in which each bar represents a frequency. Select the bar to be adjusted by using the buttons. The selected bar will start to flash and it can be adjusted using buttons.

6. To store the setting, press the MENU or AUDIO buttons.

Menu

MENU Button Functions

Press the MENU button briefly to activate the Menu function.

Use the buttons to scroll through the menu functions. To change the setting of the selected function, use the buttons.

The current status of the selected function appears on the display.

The functions managed by the Menu are:

• Speech Volume
• Aux Audio Offset
• Radio Off
• Sat ID
• SIRIUS Telephone Number
• System Reset
• Speed Volume
• On Volume Limit

Press the MENU button again to exit the Menu function.

Speed Volume Function — If Equipped

This function automatically adapts the volume level to the speed of the car, turning up the volume when the speed increases to maintain the ratio with the noise level inside the passenger compartment. To activate/ deactivate the function, use the buttons. The wording “Speed volume” appears on the display, followed by the current status of the function:

• Off: function deactivated
• Low: function activated (low sensitivity)
• High: function activated (high sensitivity)

On Volume Limit

This function makes it possible to activate/deactivate the maximum volume limit when turning the radio on.

The display shows the function status:

• “On volume limit: on” – when the radio is turned on the volume level will be: − If the volume level is equal to or higher than the maximum value, the radio will come on at the maximum volume.

− If the volume level is between the minimum and maximum values, the radio will come on at the same volume as before it was switched off.

− If the volume level is equal to or lower than the minimum value, the radio will come on at the minimum volume.

• “On volume limit: off” – The radio will come on at the same volume as before it was switched off. The volume level can be between 0 and 40.

Use the buttons to change the setting.

NOTE:

• Using the Menu it is only possible to adjust the activation/deactivation of the function and not the minimum or maximum volume value.
• If the battery charge is too low, the volume cannot be adjusted between the minimum and the maximum level.

Radio Off Function

This function makes it possible to set the radio switching off mode by choosing between two methods.

The chosen mode appears on the display:

• “Radio off: 00 min” — The radio turns off in connection with the ignition key; the radio is turned automatically off as soon as the key is turned to the STOP position.

• “Radio off: 20 min” — The radio turns off independently from the ignition key; the radio remains on for a maximum period of 20 minutes after the key has been turned to the STOP position.

System Reset Function

This function is used to restore all settings to the factory values. The options are:

• NO — No restore intervention.
• YES — The default parameters will be restored. During such operation, the wording “Resetting” appears on the display. At the end of the operation, the source does not change and the previous situation will be displayed.