See also:
Side direction indicators
To change the bulb, proceed as follows:
1) Press the lens A-fig. 24 in the direction of the arrow so to compress the
clip and remove the cluster.
2) Turn the bulb holder counterclockwise, remove t ...
Electronic control units
When the vehicle is being used normally, special measures are not necessary.
The following instructions must be followed very carefully, however, if you work
on the electrical system or in cases wh ...
(D) Drive Vehicle
Immediately after injecting sealant and inflating the tire, drive the vehicle
5 miles (8 km) or 10 minutes to ensure distribution of the TIREFIT Sealant within
the tire. Do not exceed 55 mph (88 k ...


