See also:

Dipped beams
To change the halogen bulb, proceed as follows: 1) Remove the protection cover Bfig. 18 turning it counterclockwise; 2) Release clip A-fig. 20, remove connector B and remove the bulb C. ...

General instructions
Wheel changing and correct use of the jack and spare wheel call for some precautions as listed below. Do not use the jack for loads over the value indicated on the plate. The jack should only be ...

Cellular phone set-up
The system set-up consists of: – a dual-purpose aerial (sound system + cellular phone), on the vehicle roof; – a dual-purpose aerial connection wires and ten-pin connector wiring fig. 146. – a do ...