Proceed as follows:
❒ close all dashboard vents;
❒ turn knob (A) to 
;
❒ turn knob (C) to 4 
;
❒ turn knob (D) to 
.
See also:
Programming Additional Transmitters
Refer to Sentry Key “Customer Key Programming.” If you do not have a programmed
RKE transmitter, contact your authorized dealer for details. ...
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...
How To Engage The Automatic Locking Mode
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until the entire belt is extracted.
3. Allow the belt to retract. As the belt retracts, you will hear ...