Proceed as follows:
❒ turn knob (A) to ;
❒ turn knob (C) to 4 ;
❒ turn knob (D) to
❒ slider (B) at .
After demisting/defrosting, operate the controls to restore the required comfort.
Preventive demisting procedure
In the event of considerable outside moisture and/or rain and/or considerable differences in temperature inside and outside the passenger compartment, perform the following preventive demisting procedure:
❒ slider (B) at ; ❒ turn knob (A) to ; ❒ turn knob (C) to 2; ❒ turn knob (D) to or to if the windows do not mist up.
See also:
(D) Drive Vehicle
Immediately after injecting sealant and inflating the tire, drive the vehicle
5 miles (8 km) or 10 minutes to ensure distribution of the TIREFIT Sealant within
the tire. Do not exceed 55 mph (88 k ...
In the 50 United States and Washington, D.C.
If you believe that your vehicle has a defect that could cause a crash or cause
injury or death, you should immediately inform the National Highway Traffic Safety
Administration (NHTSA) in additio ...
To Accelerate For Passing
Press the accelerator as you would normally. When the pedal is released, the
vehicle will return to the set speed.
Using Electronic Speed Control On Hills
The transmission may downshift on hills t ...