Move slider (B) to 
.
This function is particularly useful when the outside air is heavily polluted (in a traffic jam, tunnel, etc.). However, it is better not to use it for long periods, especially if there are several people in the car.
IMPORTANT The inside air recirculation system makes it possible to reach the required “heating” or “cooling” conditions faster. Do not use the air recirculation function on rainy/cold days as it would considerably increase the possibility of the windows misting inside.
See also:
Fuel cut-off switch (FIS)
It is located under the dashboard on the front right-hand door pillar and it
comes into operation in the case of an accident to block the supply of fuel thereby
stopping the engine.
Carefully i ...
Inefficient abs system
(amber)
Turning the ignition key to MAR the warning light turns on, but it should go
off after few seconds.
The warning light turns on when the system is inefficient or unavailable. In
this ca ...
Front sidelights
To change the bulb, proceed as follows:
1) Remove the protection cover B-fig.
18 turning it counterclockwise;
2) Press tabs A-fig. 21, remove the bulb holder from housing B and remove the
bulb C ...