The warning light on the dial turns on when the main beams are turned on.
See also:
How to keep the seat belts always in efficient conditions
Observe the following:
❒ Always use the belt with the tape taut and never twisted; make sure that it
is free to run without impediments;
❒ After a serious accident, replace the belt ...
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...
Loading
The vehicle maximum load on the tire must not exceed the load carrying capacity
of the tire on your vehicle. You will not exceed the tire’s load carrying capacity
if you adhere to the loading cond ...