REPLACING THE FILTER
1.28V version
Loosen the screws on the side and on the air cleaner cover, remove the cover (A) and remove the filtering element (B) to be replaced.
1.3 Multijet versions
Loosen the screws (A), remove the cover (B) and remove the filtering element (C) to be replaced.
See also:
To close the bonnet
Proceed as follows:
❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess
(D) replace it in its clip;
❒ lower the bonnet at approx. 20 cm from the engine ...
Types of bulbs
Various types of bulbs are fitted to your car:
(A) All glass bulbs: these are pressed on. Pull to remove.
(B) Bayonet type bulbs: press the bulb, and turn counterclockwise to remove this
type of ...
12. Charging System Light
This light shows the status of the electrical charging system. The light should
come on when the ignition switch is first turned to ON/RUN and remain on briefly
as a bulb check. If the light sta ...