Check that it is safe to open a door before doing so.
Make sure that the left-hand sliding side door is completely closed before refueling (see “At the filling station” in this chapter). You could damage the door and the sliding lock system which comes into play when the fuel flap is open.
You cannot open the left-hand sliding side door while refueling when the flap is open (see “At the filling station” in this chapter).
In Doblò Cargo versions, the side sliding door is fitted with a catch which stops it when it is fully open: to release the catch, simply push the door against the catch and pull it forwards forcefully.
In any case, always make sure that the door is correctly fastened in the door open catch.
Do not leave the vehicle parked on a steep slope with the sliding door open. An involuntary knock could release the door and make it slide.
When leaving the vehicle parked with the sliding doors open, always check that the door hooks are properly fastened into the retaining device to ensure it remains fully open.
Opening/closing from the outside (Fiat Doblò Cargo versions)
Opening: turn the key to 2-fig. 110 and pull the handle in the direction of the arrow then, make the door slide backward to the stop limit catch.
Closing: use the external handle and push the door forward. Turn the key to 1- fig. 110.
Closing: close the door making it sliding forward, then press once the lever at “LOCK” as shown in fig. 111
Opening/closing from the outside (Fiat Doblò Passenger Transport/Combi versions)
Opening: pull the handle as shown by the arrow fig. 110 and make the door slide backward.
Closing: pull the handle as shown by the arrow fig. 110, thus releasing the lock and make the door slide forward.
Opening/closing from the inside (Fiat Doblò Passenger Transport/Combi versions)
Opening: pull the release lever Afig.
112 and make the door slide backward.
Closing: pull the release lever A and make the door slide forward; lock the door by pressing the handle button B.
See also:
Engine coolant temperature gauge
This shows the temperature of the engine coolant fluid and begins working when
the fluid temperature exceeds approx. 50°C.
Under normal conditions, the needle should hover around the middle of the ...
Automatic Operation
1. Press the AUTO button on the Automatic Temperature Control (ATC) Panel, the
indicator will illuminate when on.
2. Next, adjust the temperature you would like the system to maintain by adjusting ...
Central vents
(A) - Air flow opening/closing control. ...