– Begin to move forward slowly letting the engine turn at medium revs.
Do not accelerate abruptly.
– Do not push the engine to its limit for the first few kilometers. You are recommended to wait until the coolant temperature gauge starts moving.
See also:
Front direction indicators
To change the bulb, proceed as follows:
1) Turn the bulb holder A-fig. 18 and remove it.
2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling).
...
Glow plugs
Turning the ignition key to MAR, the warning light on the dial comes on and goes
off when glow plugs reach the preset temperature. Start the engine immediately after
warning light switching off. ...
Warning light check function
The instrument panel performs a check on the following warning lights:
❒ handbrake on/low brake fluid level;
❒ ABS and EBD system;
❒ ESP system on/failure;
❒ “Dualdri ...