Modifications or repairs to the electrical system carried out incorrectly
and without bearing the features of the system in mind can cause malfunctions with
the risk of fire.
You should have the bulbs replaced at a Fiat Dealership. Always check the
height of the headlight beam after changing a bulb.
Only touch the metal part when handling halogen bulbs. If the transparent bulb is touched it reduces the intensity of the light emitted and can also reduce the life of the bulb. If you touch the bulb accidentally, rub it with a cloth moistened with alcohol and leave it to dry.
Halogen bulbs contain
pressurized gas which, if broken, may cause small fragments
of glass to be projected outwards.
See also:
Engine
GENERAL FEATURES
(*) For specific markets where applicable
FUEL SUPPLY/IGNITION
Petrol versions
Electronic Multipoint sequential phased injection integrated with ignition,
return less
syst ...
Radio-frequency remote control: ministerial homologation
The homologation number is printed directly on the key grip for the markets where
this is required. ...
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...