Follow the “Service Schedule” to the letter as concerns braking and fuel line rubber tubing. Ozone, high temperatures and long absence of fluid in the system can in fact cause the hardening and cracking of the pipes with possible loss of fluid. A careful check is therefore essential.
See also:
Preparations For Jacking
1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving
traffic, pull far enough off the r ...
Low brake fluid level
Turning the ignition key to MAR the warning light on the dial turns on, but it
should go off after few seconds.
The warning light turns on (together with the message on the display) when the
...
Ignition Key Removal
1. Place the shift lever in PARK (if equipped with an automatic transmission).
2. Turn the ignition switch to the ACC/ON/RUN position.
3. Rotate the key to the OFF/LOCK position.
4. Remove the key ...