This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:
• How various systems in your vehicle were operating;
• Whether or not the driver and passenger safety belts were buckled/fastened;
• How far (if at all) the driver was depressing the accelerator and/or brake pedal;
and,
• How fast the vehicle was traveling.
These data can help provide a better understanding of the circumstances in which crashes and injuries occur.
NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation
occurs; no data are recorded by the EDR under normal driving conditions and no personal
data (e.g., name, gender, age, and crash location) are recorded. However, other
parties, such as law enforcement, could combine the EDR data with the type of personally
identifying data routinely acquired during a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed.
In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.
See also:
Eobd - engine control system failure
In normal conditions, turning the ignition key to MAR, the warning light turns
on, but it should go off when the engine has started. The initial turning on indicates
that the warning light is ...
Treadwear
The Treadwear grade is a comparative rating, based on the wear rate of the tire
when tested under controlled conditions on a specified government test course. For
example, a tire graded 150 would ...
Spare Tire Removal
The spare tire is stowed to the underbody below the cargo area.
1. Remove the plug located in the rear cargo area.
Winch Access Plug
2. Fit the wrench tool over the drive nut. Use the wrench to ...


